Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Removal and device of the pipeline of access

Pipeline of access of M120.980 motors

Removal

Details of the device of the pipeline of access of M120.980 motors (from an arrow blocking jasytschok of a cover of the switch is shown)


6 — drosselnoj control lever saslonkoj 10 — the carrier 14, 15, 16 — bolts 17 — bank of the block 17/2 — Povremenno topliwoprowod 17/3 — Aggravating topliwoprowod 18 — transferring	18/1 — Uplotniteli 19 — the access pipeline 19/1 — mezhduflanets 20 — a switch cover 27 — Directing 28 — a plastic clip 30, 98 — a rope of management

EXECUTION ORDER

1. Accept the filter for purification of air.
2. Accept an electronic incentive of management of drosselnoj saslonkoj together with drosselnoj saslonki body.
3. Accept a sleeve with lines about the access pipeline.
4. Accept a cover (20) at the switch. By means of the otzepite jasytschok screw-driver.
5. Exclude all plugs of the line, going fashion of the pipeline of access, and accept all electric components which are connected in the access pipeline.
6. Exclude listeners of vacuum of components which are strengthened on the access pipeline.
7. Exclude a rope (30) from the drosselnoj saslonki (6) lever.
8. Squeeze a plastic clip (28) and accept the carrier (10) together with a rope (30).
9. Exclude a rope of management (98).
10. Push off pressure in the highway of distribution of fuel by means of the special gate.
11. Exclude aggravating (17/3) and povremenno (17/2) topliwoprowody.
12. Prevent bolts (14).
13. Exclude listeners of vacuum of both parties of the pipeline of access.
14. Exclude listeners of rezirkuljazii of the working access pipeline gases.
15. Accept the channel of air of access.
16. Prevent bolts (15).
17. Lift the pipeline of access (19) and accept it.
18. Accept mezhduflanets (19/1).
19. Replace transferring (18). Transferring has to be established on banks of the block.

Device

The device will be as it should be, made down removals. Regulate management of drosselnoj saslonkoj. Check and regulate idling changes.

Pipeline of access of M120.982 motors

Removal

Details of the device of the pipeline of access of M120.982 motors (from an arrow blocking jasytschok of a cover of the switch is shown)


14, 15, 16 — bolts 17 — bank of the block 17/2 — Povremenno topliwoprowod 17/3 — Aggravating topliwoprowod	18 — transferring 18/1 — Uplotniteli 19 — the access pipeline 19/1 — mezhduflanets 20 — a switch cover

EXECUTION ORDER

1. Accept the filter for purification of air.
2. Accept an electronic incentive of management of drosselnoj saslonkoj together with drosselnoj saslonki body.
3. Accept a cover of lines about the access pipeline.
4. Accept a cover (20) at the switch. By means of the otzepite jasytschok screw-driver.
5. Connect all plugs of the line which proceed about the access pipeline, and accept all electric components which are connected in the access pipeline.
6. Push off pressure in the highway of distribution of fuel by means of the special gate.
7. Exclude aggravating (17/3) and povremenno (17/2) topliwoprowody.
8. Prevent bolts (14).
9. Accept the channel of air of access.
10. Prevent bolts (15).
11. Prevent a bolt (19/10) of strengthening of the carrier (19/11).
12. Exclude a container of the pump of the amplifier of the navigator management and strengthen it along with it.
13. Lift the pipeline of access (19) and accept it.
14. Accept mezhduflanets (19/1).
15. Replace transferring (18). Transferring has to be established on banks of the block.

Device

Device as it should be, removal obratom. Regulate management of drosselnoj saslonkoj. Check and regulate idling changes.