Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
- Motor
   Check of compression in the motor cylinder
   Check of the motor by means of vacuum meter
   Serpantinnogo belt of an incentive of auxiliary devices
   + 6-cylinder petrol engines (M104.944 and M104.990/994)
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   - 12-cylinder petrol engines (M120.980/982)
      The filter for purification of air - a device detail
      Covers of the heads of the block of cylinders
      Removal and device of the pipeline of access
      Removal and device of a final collector
      The rezirkuljazii gate of the working gases - a device detail
      Air transfer pump
      Removal and device of the top halls kryschek
      Heads of the block of cylinders
      Removal and device of a cover of a chain of an incentive of GRM
      Compensation of a chain of an incentive of GRM
      GRM incentive - the general information, service of components
      Natjaschitel of a chain of an incentive of GRM
      Regulator of a wave of curves
      Removal and device of waves of curves
      Check of phases of management of gas exchange
      Check and regulation of provision of waves of curves
      Compensation judging banks of gates
      Measurement of diameters of cylinders
      Removal and device of pistons
      Check of poles of an instinct
      Removal and device of a bent shaft
      Removal and device of a peel kartera of the motor
      The touch switch of level of oil - a device detail
      The fat pump - a design and details of the device
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment


Removal and device of waves of curves

Removal

Details of the device of waves of curves


 EXECUTION ORDER

1. Accept halls top covers (30) and (30a).
2. Accept the judging levers of the heads of the block of cylinders (40).
3. Prevent the starlet (3) terminations of a wave of curves of the left head of the block of cylinders.
4. Using a key, you establish waves of curves, therefore, that (respectively) (3 and (9) (shooters) small fists of cylinders held the hydro-compensator on average situation.
5. Prevent bolts of strengthening of kryschek of waves of curves, except as the cylinder (3 and (9) (arrows) and accept them. Accept a cover (15) together with the left wave of curves of access (9).
6. Weaken bolts of strengthening of kryschek No. 3 and No. 9 (arrows) alternately after change and accept them.
7. Accept waves of curves of access.
8. Check the hydro-compensator.

Device

 EXECUTION ORDER

1. Grease everything the camp and the hydro-compensator with engine oil.
2. Establish access and final waves of curves in the axial camp.
3. Put covers of camps of waves of curves (shooter) of cylinders (3 and (9) (are firmly not shown by shooters on an illustration) and bolts alternately after change tighten you.
4. Consider in waves of curves by means of a key (25) at saworatschiwanii of bolts of strengthening kryschek No. 3 and No. 9 in such a way that small fists were directed down.
5. Establish covers of other camps and tighten bolts of strengthening (shooter).

Names of a code of waves of curves it is given in specifications.

Name kryschek of camps of waves of curves

Name kryschek of waves of curves

4 and 11 — covers of axial camps of the right head of the block of cylinders
18 and 25 — covers of axial camps of the left head of the block of cylinders