Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
- Motor
   Check of compression in the motor cylinder
   Check of the motor by means of vacuum meter
   Serpantinnogo belt of an incentive of auxiliary devices
   + 6-cylinder petrol engines (M104.944 and M104.990/994)
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   - 12-cylinder petrol engines (M120.980/982)
      The filter for purification of air - a device detail
      Covers of the heads of the block of cylinders
      Removal and device of the pipeline of access
      Removal and device of a final collector
      The rezirkuljazii gate of the working gases - a device detail
      Air transfer pump
      Removal and device of the top halls kryschek
      Heads of the block of cylinders
      Removal and device of a cover of a chain of an incentive of GRM
      Compensation of a chain of an incentive of GRM
      GRM incentive - the general information, service of components
      Natjaschitel of a chain of an incentive of GRM
      Regulator of a wave of curves
      Removal and device of waves of curves
      Check of phases of management of gas exchange
      Check and regulation of provision of waves of curves
      Compensation judging banks of gates
      Measurement of diameters of cylinders
      Removal and device of pistons
      Check of poles of an instinct
      Removal and device of a bent shaft
      Removal and device of a peel kartera of the motor
      The touch switch of level of oil - a device detail
      The fat pump - a design and details of the device
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment

Regulator of a wave of curves

Removal

Details of the device of the regulator of a wave of curves


1 — the Directing lever of the right head of the block of cylinders 2 — the Directing lever left Heads of the block of cylinders 3, 15 — bolts 4 — fittings	5 — a blocking finger 6 — mother 12 — a cover 13 — the starlet of a wave of curves 14 — Plunscher 16 — a flange

EXECUTION ORDER

1. Be lowered top covers (30) and (30a). 2. Accept the judging levers (1) and (2).
3. Prevent a bolt (3) and accept fittings (4).
4. Prevent mother (6), - you hold a wave of curves (22) from proworatschiwanija from a key (25).
5. Accept a cover (12), the starlet of a wave of curves (13) and einstel-plunscher (14). Prevent a flange (16) from a wave of curves of access (22) and accept it.

Device

EXECUTION ORDER

1. Establish a flange (16) on a wave of curves (22). Will pay attention to Einstelfinger (21). 2. Priwernite a flange (16) to a wave of curves (22). Stop in a wave of curve (22) keys (25) and tighten bolts (15).
3. Establish einstel-plunscher (14) on a flange (16) in the fixed situation, clockwise turning it.
4. Establish the starlet of a wave of curves (13) on einstel-plunscher (14) in the fixed situation, against the direction clockwise turning it.
5. Establish a cover (12).
6. Install fittings (4). The finger (shooter) in fittings (4) has to be combined with einstel-plunscherom (18). 7. Screw up a bolt (3), in fittings (4) for lysku (arrows including).