Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car



Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
- Motor
   Check of compression in the motor cylinder
   Check of the motor by means of vacuum meter
   Serpantinnogo belt of an incentive of auxiliary devices
   + 6-cylinder petrol engines (M104.944 and M104.990/994)
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   - 12-cylinder petrol engines (M120.980/982)
      The filter for purification of air - a device detail
      Covers of the heads of the block of cylinders
      Removal and device of the pipeline of access
      Removal and device of a final collector
      The rezirkuljazii gate of the working gases - a device detail
      Air transfer pump
      Removal and device of the top halls kryschek
      Heads of the block of cylinders
      Removal and device of a cover of a chain of an incentive of GRM
      Compensation of a chain of an incentive of GRM
      GRM incentive - the general information, service of components
      Natjaschitel of a chain of an incentive of GRM
      Regulator of a wave of curves
      Removal and device of waves of curves
      Check of phases of management of gas exchange
      Check and regulation of provision of waves of curves
      Compensation judging banks of gates
      Measurement of diameters of cylinders
      Removal and device of pistons
      Check of poles of an instinct
      Removal and device of a bent shaft
      Removal and device of a peel kartera of the motor
      The touch switch of level of oil - a device detail
      The fat pump - a design and details of the device
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment



Removal and device of a bent shaft

Removal

 EXECUTION ORDER

1. Accept GRM incentive chain from starlets of waves of curves and the starlet of a bent shaft.
2. Accept a chain of an incentive of the fat pump together with natjaschnym from the lever, a tension spring and the plug.
3. Prevent maslootraschatel in the block of cylinders and accept it.
4. Prevent schatunnyje of a cover and accept them.
5. Prevent covers of thorough camps and accept them.
6. Accept a bent shaft.

Device

 EXECUTION ORDER

1. Tighten strengthening bolts thoroughly kryschek of a bent shaft as it should be which is shown on illustrations.
2. Oil appendix schatunnyje with engine and establish them with schatunnymi kryschkami. Tighten schatunnyje bolts.
3. Measure on one axis of ljuft of poles of an instinct.
4. rasmernyje of the characteristic of a bent shaft, thoroughly and schatunnych of camps are given in specifications.