1. Check radial uplotnitelnyje of a ring (16 and (17) and, make its compensation as a last resort.
2. Establish radial uplotnitelnyje of a ring (16) and (17). |
|
3. Install the plug (024) on a forward cover (10).
4. Grease the connected surfaces of uplotnitelnych of rings.
5. Install the LB3 (12) piston.
6. Accept the plug (024). |
|
| 7. Strengthen the coming-back feather (14) and rise - the strong plug (13) the LB3 (12) piston. |
|
8. Establish and strengthen a tiskalshchik (020) on rise - the strong plug.
9. Establish a blocking ring (15).
10. Weaken and accept a tiskalshchik (020). |
|
| 11. Establish teflon - the covered rings (9) in flutes in a forward cover. Are convinced of correctness and its device. If it is necessary you replace them on such, but smaller diameter. |
|