Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ Gear shifting boxes
- awtomatitscheckaja transmission
   Specifications
   Search of defects - the general information
   - Automatic transmission 722.5
      Removal, check of a state and device of the reformer of Drehens (hydro-transformer)
      Removal and device of the centrifugal regulator
      Removal and device of the touch switch of blocking of a starter (solution of start)
      Vacuum knot - a device detail
      Removal, service and the device of the repeated pump (AT to No. 3652931)
      Removal and device of a forward cover of the repeated pump
      Removal and device of the LB3 piston
      Removal and device of a back cover of transmission
      Discussion and installation of installation of AT valves
      Discussion and installation of transmission
      The device and check of freedom of action in Mehrscheibenbremse B3
      Measurement of freedom of action in B1 brake
      Connection of the raising transfer
      Removal, the device and check of components of a brake of BS of the raising transfer and the KS connection
      Discussion and installation of mufty of the free movement
      Discussion and installation of planetary mechanisms
      Discussion and installation of the K1 connection
      K2 connection
      Gear shifting Selektors lever
   + Automatic transmission 722.6
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment


Discussion and installation of mufty of the free movement

Design of mufty of the free movement

1 — Korontschataja a gear wheel
2, 4 — blocking rings
3 — transferring

5 — Uplotnitelnoje a ring
6 — the roller bearing
9 — the Internal ring of mufty
10 — the External ring of mufty


 EXECUTION ORDER

1. Order transmission gears (watch office a discussion and installation of transmission).
2. Accept a blocking ring (2).
3. Be lowered by muftu (in duty), they, with gear wheel korontschatoj (1 not) ordering.
4. Accept a blocking ring (4).
5. Accept transferring (3).
6. Be lowered by uplotnitelnoje a ring (5).
7. Accept an internal ring (9) mufty from the roller bearing (6).
8. Accept the roller bearing (6).
9. Check an external ring (10) mufty, the roller bearing (6) and an internal ring (9) mufty for lack of sale.
10. Check axial freedom of action of mufty. It has to be within 0.05 - 0.2 millimeters.
11. Establish transferring (11) in such a way that schejka (arrows) on an external ring of mufty was established in opening.
12. Establish transferring (17) and an external ring of 10 mufty with an internal ring (9) in connecting support.
13. Establish persistent glass (18) in internal Disk (24).
14. Establish internal Disk (24) in connecting support (7). Establish a blocking ring (21).
15. Check axial freedom of action between transferring (17) and from connecting support (7), the axial freedom of action is regulated by selection of transferrings. Transferrings of thickness of 0.1, 0.2 and 0.3 mm are issued.