Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car



Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ Gear shifting boxes
- awtomatitscheckaja transmission
   Specifications
   Search of defects - the general information
   - Automatic transmission 722.5
      Removal, check of a state and device of the reformer of Drehens (hydro-transformer)
      Removal and device of the centrifugal regulator
      Removal and device of the touch switch of blocking of a starter (solution of start)
      Vacuum knot - a device detail
      Removal, service and the device of the repeated pump (AT to No. 3652931)
      Removal and device of a forward cover of the repeated pump
      Removal and device of the LB3 piston
      Removal and device of a back cover of transmission
      Discussion and installation of installation of AT valves
      Discussion and installation of transmission
      The device and check of freedom of action in Mehrscheibenbremse B3
      Measurement of freedom of action in B1 brake
      Connection of the raising transfer
      Removal, the device and check of components of a brake of BS of the raising transfer and the KS connection
      Discussion and installation of mufty of the free movement
      Discussion and installation of planetary mechanisms
      Discussion and installation of the K1 connection
      K2 connection
      Gear shifting Selektors lever
   + Automatic transmission 722.6
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment



Removal and device of a forward cover of the repeated pump

Removal

Details of the device of a forward cover with the repeated pump


 EXECUTION ORDER

1. Prevent bolts (18).
2. Accept a forward cover (10), 2 bolts (18) (the shooter it is prevented).

Discussion

Details of the device of a forward cover with the repeated pump

1 — a cover of a body of pompovy installation
2 — Persistent glass
3, 4 — a pump gear wheel
6 — network
7 — Uplotnitelnoje a ring
10 — a forward cover of transmission gears
12 — the LB3 piston
13 — the Rise-strong plug

14 — the Coming-back feather
15 — a blocking ring
16, 17 — a ring of network
19 — transferring
20 — the roller bearing
21, 22 — the Teflon-covered rings
23 — a bolt

 EXECUTION ORDER

1. Accept the LB3 (12) piston.
2. Prevent bolts (23) and accept with forward a cover (10) a body of the repeated pump (1) with mezhdudisky (2).
3. Accept междудиск.
4. Accept radial network (6) and replace it. If the roller bearing (20) is damaged, the repeated pump has to be replaced.
5. Pull out both gear wheels of the pump (to 3 and (4) body of the pump.

Installation and device

Installation and the device will be as it should be, made down removals.