Mercedes S-Class W-140

1. Accept Mehrscheibenkupplungen K1, K2 and K3.
2. Prevent bolts (7a) and accept the fat pump (7). Prevent 2 opposite bolts in a body of the fat pump and pull out the fat pump from a body the hydro-transformer, tapping a plastic hammer a little.
3. Prevent bolts (6á) and pull out Mehrscheibenbremse B1 (6) to a hydro-transformer body. Prevent 2 opposite bolts in Mehrscheibenbremse B1 and pull out it from a hydro-transformer body, tapping a plastic hammer a little.
4. Exclude междудиск (8) from a body of the hydro-transformer (1).

1. Install междудиск (8) on a body the hydro-transformer (1). Mezhdudisk can be used repeatedly.
2. Turn bolts of strengthening of Mehrscheibenbremse of B1 (6) in a body of the hydro-transformer (1). Einstellage Mehrscheibenbremse B1 concerning a body of the hydro-transformer clears up from the judging finger on Mehrscheibenbremse B1.
3. Install the fat pump (7) and tighten bolts of its strengthening.
4. Establish Mehrscheibenkupplungen K1, K2 and K3. On the accompanying illustration the fat channel is shown for the K1 connection.