Mercedes S-Class W-140

1. Weaken the judging plug (21) and accept them from transmission.
2. Accept a peel (3).
3. Accept the fat filter (5).
4. Prevent bolts (19a) and accept the electro-hydraulic AT (19) control unit.
5. Accept a flange (48).
6. Wypressujte radial network (20), you accept transferrings (67a), a blocking ring (68) and wypressujte the ball-bearing (67) at a transmission body.
7. Accept transferring (18).
8. Prevent a bolt (1a) and (2a) from a body the hydro-transformer and transmissions.
9. Accept a body of transmission (2) from a body the hydro-transformer (1).

1. Grease germetikom and establish in a fold everything together teflon - the covered rings (12a).
2. Install transmission gears (2) on the hydro-transformer (1), unite Disks of brakes of B2 and B3.
3. Turn bolts (1a) and (2a).
4. Measure freedom of action between a dog of stojanotschnogo to brakes and the ball-bearing. It has to be within 0.3-0 5 mm.
5. Establish transferring (18), sapressujte the ball-bearing in thinking out transmission bodies.
6. Establish transferrings (67a).
7. Establish radial network (20) in a transmission body.
8. Establish a flange (48).
9. Establish and tighten bolts of strengthening of the electro-hydraulic AT (19) control unit.
10. The installation as it should be which is carried out down discussions will be farther.