Mercedes S-Class W-140

1. Exclude a body transmission body the hydro-transformer.
2. Accept Mehrscheibenkupplungen K1, K2 and K3.
3. Accept on the top of 2nd seen teflon - covered rings (42b) from a transfer wave.
4. Accept a blocking ring (42f), transferring (42e), the persistent camp in the form of a needle (42d) and persistent glass (42c) from a transfer wave.
5. Accept the K3 (44) connection.
6. Accept a back empty wave (45) from a transfer wave.
7. Accept the back block of planetary gear wheels (43) with the integrated empty wave, the central block of planetary gear wheels of a wave of transfer.
8. Accept persistent glass (43a).
9. Accept Mehrscheibenbremse B1 and the fat pump.

1. Establish persistent glass (43a) from a cuff in the direction after the driver.
2. Install the back block of planetary gear wheels (43) with the integrated empty wave, the central block of planetary gear wheels on a transfer wave.
3. Grease and establish the 3rd lower teflon - to the covered rings (42b) in a fold in such a way that they together were established.
4. Establish a back empty wave (45) on a transfer wave. Check ring uplotnitelnyje on an empty wave and replace them if it is necessary.
5. Establish the K3 connections.
6. Establish a blocking ring, transferring, the persistent camp in the form of a needle and persistent glass.
7. Grease and establish the 2nd top teflon - to the covered rings (42b) in a fold in such a way that they together were established.

1. Check axial freedom of action between transferring (42e) and to a blocking ring (42f). It has to form 0.15 - 0.6 millimeter. Regulate freedom of action by means of transferring (42e). Thickness of transferrings of 3.0, 3.4 and 3.7 mm.
2. Establish Mehrscheibenkupplungen K1, K2 and K3.