Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Discussion and installation of a key wave with the K2 connection and forward block of planetary gear wheels

Discussion

Details of the device of components of a key wave with the K2 connection and the forward block of planetary gear wheels


84 — the Internal support of the K1 connection with the integrated forward block of planetary gear wheels 84a — a gear wheel 84b, 104, 106 — blocking rings 85 — persistent the camp in the form of a needle 100 — a key wave with the K2 connection 101 — pistons	101a — Internal network of the piston 101b — External network of the piston 102, 107 — feathers of glasses 103 — the Rise-strong bolt 103a — network rise - a strong bolt 105 — the Disks block

EXECUTION ORDER

1. Exclude a body transmission body the hydro-transformer. 2. Accept the K1, K2 and K3 connections. 3. Pull out a blocking ring (84b) from an internal support of the K1 (84) connection and accept a gear wheel (84a) (watch sopr. Illustration). 4. Accept a key wave with the K2 (100) connection. 5. Accept the persistent camp in the form of a needle (85). 6. Accept a blocking ring (106) from an external support of the K2 connection. 7. Accept the Disks (105) block. 8. Accept a feather of glasses (107).
9. Establish a tiskalshchik (076) on rise - a strong bolt (103) and press it until the blocking ring (104) is not released.
10. Accept a blocking ring (104). 11. Accept a feather of glasses (102) and pull out the piston (101) of an external support.

Installation

Check of freedom of action between a blocking ring (90) and external Disk (89c)


100a — the External support of the K2 connection 101 — pistons 105a — External Disk from thickness of 1.8 mm 105b — External Disk from thickness of 3.5 mm / new thickness of 2.8 mm 105c — External Disk from thickness of 4.0 mm	105d — Reibscheiben 106 — a blocking ring 107 — a feather of glasses L — freedom of action

Installation will be as it should be, carried out down discussions. Check freedom of action between a blocking ring (106) and external Disk (105c). The size of freedom of action in the K2 connection of a nizheperechislen in the table. As a last resort you regulate freedom of action by means of selection of a blocking ring (106) necessary thickness. Rings of thickness of 2.3, 2.6, 2.9, 3.2, 3.5 and 3.8 mm are issued.