Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
- Motor
   Check of compression in the motor cylinder
   Check of the motor by means of vacuum meter
   Serpantinnogo belt of an incentive of auxiliary devices
   - 6-cylinder petrol engines (M104.944 and M104.990/994)
      Cover of the head of the block of cylinders - a device detail
      Removal and the device of the pipeline of access of the resonator (except the motor 104.990)
      Final collector (except the motor meter 104.990) - a device detail
      Removal and device of the head of the block of cylinders
      Removal and device of a cover of a chain of an incentive of GRM
      GRM incentive - the general information, service of components
      The starlet of a bent shaft - a device detail
      Removal and device of the regulator of a wave of curves
      Removal and device of waves of curves
      Compensation judging banks of gates
      Compensation of Sättel of gates
      Removal and device of pistons
      Compensation of piston rings
      Check of a condition of poles of an instinct
      Check of a condition of a bent shaft
      Service of the block of cylinders
      Removal and device of a peel kartera of the motor
      The fat pump - a device detail
      The touch switch of level of oil - a device detail, test data
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   + 12-cylinder petrol engines (M120.980/982)
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment


Removal and device of the regulator of a wave of curves

Look also has GRM incentive - the general information, service of components extended.


Regulator of a wave of curves

1, 3, 15, 15a, 10 — bolts
2, 12 — a ring
4 — fittings
5, 21 — fingers
6 — mother
7 — a forward cover
8, 11 — Uplotnitelnyje of a ring
9 — the adapter

13 — the starlet of a wave of curves
14 — Einstelkolben
16 — a regulator flange
17 — a feather
18 — Plunscher
19 — a blocking ring
20 — the plug
22 — a wave of curves

Removal

 EXECUTION ORDER

1. Install the piston of the first cylinder in WMT.
2. Accept the top cover.
3. Designate position of starlets of waves of curves concerning GRM incentive chain.
4. Prevent a bolt (3), in fittings (4) (the shooter including). Accept fittings (4).
5. Prevent mother 6 and accept a cover with a ring (12).
6. Prevent the starlet of a wave of curves.
7. Accept the starlet (13) and Einstelkolben (14). Prevent bolts (15) and (15a) and accept a flange (16) from the starlet of a wave of curves of access.

Device

 EXECUTION ORDER

1. Establish a flange (16) on a wave of curves (22). Are convinced of correctness of the device of a finger 21.
2. Install the piston (14) on a flange (16) in the provided situation, on the left turning it. Lift GRM incentive chain upward.
3. Establish the starlet of a wave of curves (13) on Einstelkolben (14) in the provided situation, to the right turning it; lift GRM incentive chain before execution.
4. Establish a cover with a ring (12) and turn mother (6), but do not tighten completely.
5. Establish the starlet on a final wave of curves.
6. Establish GRM incentive chain on both starlet according to signs. Tighten mother (6) on the regulator.
7. Install fittings (4) on plunscher (18). Tighten a bolt (3). The finger of roles (shooter) in fittings (4) has to be combined with a low surface on plunschere (18).

8. Establish a forward cover above.