Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Removal and device of the head of the block of cylinders

Details of the device of the head of the block of cylinders

Removal

EXECUTION ORDER

1. Pull together the cooled liquid and exclude cutting of cooling of the head of the block of cylinders. 2. Bring the piston of the first cylinder into position of WMT of the end of a step of compression. 3. Accept the top forward cover. 4. Designate position of starlets of waves of curves concerning a chain of an incentive of GRM (shooter). 5. Pull out a finger of the judging lever or the sliding lever by means of a tiskalshchik. 6. Prevent fittings of the regulator of a wave of curves. 7. Accept GRM incentive chain from starlets of waves of curves. 8. Exclude the line of the motor. For this purpose you weaken all stjaschnyje gang and you exclude all plugs of the line. 9. Exclude tempostata draft. 10. Exclude the plug of the line (X25/17) and the plug of the line (X16/1x1) from an electronic incentive of a pedal of an accelerator, press a dog and turn them on 90 °. 11. Exclude listeners of vacuum of the pipeline of access. 12. Prevent bolts of strengthening of system of the edition to a flange of a final collector. 13. Exclude the listener of the return gate of the listener of podmeschiwanija of air in an exhaust (shooter) and prevent the carrier (1). 14. Prevent the carrier of the judging pipe of the list of level of oil and the carrier of the pipeline of access. 15. Exclude the listener (43) from the carrier (17) on the block the cylinder. 16. Slowly open a tank neck saliwnoj cover for immersion of pressure in system of power supply. Prevent topliwoprowody. 17. On models with AT: prevent the judging pipe of the list of level of oil from the block of cylinders which is thinking out the heads. 18. Exclude priwodnoj a rope (30) from the control lever (9). For this purpose you squeeze a plastic clip (28). 19. Weaken stjaschnyje gang of strengthening of cutting of the cooling system to the cooling system pump. Accept the coming-back listener. 20. Weaken bolts of strengthening of the head of the block of cylinders as it should be, down shown on an illustration. At the same time the motor has to be cold. 21. Be lowered covers of camps No. No. 9 and 13. Establish Hebehenkel and accept the head of the block of cylinders of the motor. 22. Wipe the contact surfaces of the head of the block of cylinders and the block of cylinders. Replace transferring of the head of the block of cylinders.

Device