Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
- Motor
   Check of compression in the motor cylinder
   Check of the motor by means of vacuum meter
   Serpantinnogo belt of an incentive of auxiliary devices
   - 6-cylinder petrol engines (M104.944 and M104.990/994)
      Cover of the head of the block of cylinders - a device detail
      Removal and the device of the pipeline of access of the resonator (except the motor 104.990)
      Final collector (except the motor meter 104.990) - a device detail
      Removal and device of the head of the block of cylinders
      Removal and device of a cover of a chain of an incentive of GRM
      GRM incentive - the general information, service of components
      The starlet of a bent shaft - a device detail
      Removal and device of the regulator of a wave of curves
      Removal and device of waves of curves
      Compensation judging banks of gates
      Compensation of Sättel of gates
      Removal and device of pistons
      Compensation of piston rings
      Check of a condition of poles of an instinct
      Check of a condition of a bent shaft
      Service of the block of cylinders
      Removal and device of a peel kartera of the motor
      The fat pump - a device detail
      The touch switch of level of oil - a device detail, test data
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   + 12-cylinder petrol engines (M120.980/982)
   + 6-cylinder diesel engines (OM603.971)
   + 6-cylinder diesel engines (OM606.961)
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment

Removal and device of a peel kartera of the motor

Motor kartera peel device details


3 — transferring 4 — a peel 5, 15, 22 — bolts 7 — the plug of the line of a sensor Oil level 8 — an oil level sensor 9a — transferring	14, 21 — Masloprowody 22a — a support 23 — mother 24 — an oil pressure sensor 25 — a feather 26 — the stabilizer of cross immunity

Removal

EXECUTION ORDER

1. Exclude the negative line of the battery. 2. Accept air receipt. 3. Exclude the lower protective sign of the motor. 4. Pull together engine oil (about 7.0). Replace transferring and screw up a drain stopper.
5. Prevent bolts of strengthening (a) of a forward support of the motor. Prevent Muttern (b) of strengthening of the stabilizer (2). Replace samokontrjaschtschijessja Muttern.
6. Exclude the plug of the line (7) from an oil level sensor. 7. Exclude the plug of the line (24) from an oil pressure sensor. Strengthen, thus what not to damage it when raising the motor. 8. On models with AT you exclude masloprowody (14 and (15) from a peel. 9. Exclude masloprowody (21) from a peel. 10. Accept the stabilizer (26).
11. Lift the motor by means of the elevator.
12. Accept feathers of a suspension bracket of a forward axis.
13. Lift a forward axis by means of lebedki. Prevent plasticity of a cover more than 2 back points of a forward axis.
14. Prevent 4 bolts of strengthening of a forward axis. Wipe opening of a slice, and replace strengthening bolts with new. 15. Lower a forward axis.
16. Prevent bolts of strengthening of a peel, translate it forward and lower it. Accept it, translated forward. Replace bolts and transferring (3).

Device

The device becomes made as it should be, down an order of the device of components. Pursue attention of requirements at the strengthening train moments.