1, 3 — bolts 2 — a disk 4 — a pipe S4 — the Combined switch.
Version A — edges are for extraction of a sign of devices ahead The version B — edges are for extraction of a sign of devices behind
The edge of identification is provided in the version "B" in the middle of (shooter)
Removal
EXECUTION ORDER
1. Accept a steering wheel, contact of spiralnuju a feather and a sensor of an angle of change of a steering wheel.
2. Establish hooks (8 mm) of both parties between a sign of devices and the panel of devices and turn them on 90 ° inside in the direction after a sign of devices.
3. Pull out a board of devices of both parties, for example, on 8 mm by means of hooks. Then you pull out a board of devices completely, hooks on 120 ° head over heels.
Device
The device will be as it should be, carried out down removals.