Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ Electric equipment of the motor
- Gear shifting boxes
   Specifications
   Removal and device of transmission gears
   Forward cover of transmission gears - a device detail
   Removal and device of a back cover of transmission gears
   + RKPP 717.438
   - RKPP 717.454
      Removal and device of a sensor of speed of the car (VSS)
      Removal and device of a forward cover of transmission gears
      Removal and device of a back cover of transmission gears
      Removal and the device between kartera
      Compensation of network of a back cover of transmission gears
      Removal and device of waves of transmission gears
      Discussion and installation of an intermediate wave
      Check of rasmernych of characteristics of transmission gears
      Compensation of conic roller bearings of an intermediate wave
      Compensation of ball-bearings of an intermediate wave
      Regulation of the mechanism of gear shifting
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment

Check of rasmernych of characteristics of transmission gears

It will be removals between a body of transmission gears and a key wave, between the conducted wave and mezhdudisky with the ball-bearing checked, and are regulated by means of the device of transferrings.

Measurement of volumes of transmission gears

The tested volumes:

Removal of "A" between the connected surface of a body of transmission gears and a key wave, to the end of mufty of application of the 5th transfer (face value forms 141.8 mm.

Removal "In" - between the surface of a forehead of Synchronisators 4/5th of transfers and the connected surface between kartera (the face value forms 140.4 mm).

Removal "With" - between the connected surface between kartera and an internal jingle of the camp.

Removal of "A" is regulated by transferrings (43a) to a key wave.

EXECUTION ORDER

1. A key wave (2) together with the ball-bearing (43) in a body of transmission gears you just establish to Sapressujte kraniku hall when transferrings.
2. By means of a measuring latch you measure removal from the connected surface of a body of transmission gears up to the surface of a forehead of mufty. Face value forms 141.8 mm determination of thickness of transferring: the face value (141.8 mm) - the Measured removal (141.4 mm) = = the transferring Thickness (0.4 mm). Transferrings of thickness of 0.2, 0.3 and 0.9 mm are issued.
3. Carefully establish a key wave with the ball-bearing in a body of transmission gears.
4. Sapressujte of transferring (shooter) on the ball-bearing and sapressujte a key wave in a body of transmission gears by means of wykolotki. Check nominal removal.
5. Removal "In" transferrings (36) in a forward ring of friction (35) kossosuboj of a gear wheel of the 2nd transfer (33).
6. Sapressujte the ball-bearing (70) in between karter you just tighten bolts (69) Blocking rings (73) to 30 Nanometers.
7. By means of the press you put between karter in the conducted wave.
8. By means of a measuring latch you measure removal from Synchronisator 4/5th of transfers up to the connected surface between kartera. Face value forms 140.4 mm determination of thickness of transferrings: the face value (140.4 mm) - the Measured removal (140.1 mm) = the transferring thickness (0.3 mm). Transferrings of thickness of 0.2, 0.3, 0.5 and 1.4 mm are issued.
9. Accept междудиск the conducted wave and regulate freedom of action of transferrings.
10. Removal "With" is regulated by transferrings (66) on the ball-bearing in a mezhdudiska.
11. Strengthen the conducted wave with mezhdudisky in Schraubstock and, using a measuring latch, measure removal from a back surface between kartera to an internal jingle of the camp. Determination of thickness of transferring: The measured removal (25.9 mm) - the face value (24.3 mm) = the transferring thickness (1.6 mm). Transferrings of thickness of 0.1, 0.3, 0.5 and 1.4 mm.
12. Regulate removal from transferrings, they between the ball-bearing and a ring of friction it is established. 13. Be lowered between karter and wypressujte the ball-bearing of the conducted wave.