Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ Electric equipment of the motor
- Gear shifting boxes
   Specifications
   Removal and device of transmission gears
   Forward cover of transmission gears - a device detail
   Removal and device of a back cover of transmission gears
   + RKPP 717.438
   - RKPP 717.454
      Removal and device of a sensor of speed of the car (VSS)
      Removal and device of a forward cover of transmission gears
      Removal and device of a back cover of transmission gears
      Removal and the device between kartera
      Compensation of network of a back cover of transmission gears
      Removal and device of waves of transmission gears
      Discussion and installation of an intermediate wave
      Check of rasmernych of characteristics of transmission gears
      Compensation of conic roller bearings of an intermediate wave
      Compensation of ball-bearings of an intermediate wave
      Regulation of the mechanism of gear shifting
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment

Removal and the device between kartera

Device details between kartera

Device details between kartera


20 — the Conducted wave 33 — Kossosubaja a gear wheel 2. pereletschi 35, 65, 73, 78 — External jingles of camps 36, 44, 49a, 66 — transferring 45 — a blocking ring 46 — a wave of transfer of a backing 47, 55, 60 — the camp in the form of a needle 48 — a backing gear wheel 49 — междудиск 51 — the plug 52 — Kossosubaja a backing gear wheel	53 — Synchronisators ring 57, 61 — the plug 58 — Synchronisator 59 — Kossosubaja a gear wheel of the 1st transfer 62 — Mufta of application of the 1st transfer 63 — an appendix fork 64 — the appendix lever 65 — a friction ring 67 — the laminated spring 69 — a bolt 70 — the ball-bearing

Removal

EXECUTION ORDER

1. Accept a blocking ring (45). Accept a gear wheel of a backing (48) with the camp in the form of a needle and 2 transferrings (44) Twist a backing (46).
2. Accept kossosubuju a gear wheel (52) transfers of a backing with the plug (51) by means of a tiskalshchik and accept the camp in the form of a needle (55).
3. Accept from the conducted wave the lever (64), a fork (63) and muftu (62) applications of the 1st transfer.
4. Accept at Synchronisator (58) 1-1/reverse of gears together with the plug (57) transfers of a backing.
5. Be lowered from the conducted kossosubuju wave a gear wheel of the 1st transfer (59) with a ring of Synchronisators (63) and to the camp in the form of a needle (60).
6. poddew from 2 screw-drivers, the ring of friction (65) and the plug (61) pull out you so that the ring of friction (65) met, for example, on 3 mm. If it is necessary to heat the plug strongly of sapressowana, it is a little of them.
7. Accept a ring of friction and the plug by means of a tiskalshchik.
8. Prevent bolts (69) strengthenings of fastening.
9. Be lowered between karter (49) from transmission gears.
10. By means of a tiskalshchik you are diminished by kossosubuju a gear wheel of the 2nd transfer (33) and the ball-bearing (70) with fastening (73).
11. Be lowered from the conducted kossosubuju wave a gear wheel of the 2nd transfer (33) and transferring (36).

Device

EXECUTION ORDER

1. The ball-bearing (70) in междудиск you just strengthen Sapressujte from fastening (73). Tighten bolts (69) with effort of 30 Nanometers.
2. Replace transferring.
3. By means of the press, sapressujte междудиск on the conducted wave and a body of transmission gears.
4. Establish transferrings (66) on a ring of friction (65).
5. Establish Synchronisator from (58) flanges in the direction after a conic gear wheel (59) 1st transfers. Heat the plug, for example, to 80 °C.
6. Put a fork in the lever such that the short shoulder (shooter) prepared in the direction after backing mufte.

The device as it should be, carried out down removals will be farther.