Mercedes S-Class W-140

In 1991-1999 editions

Compensation of network of a back cover of transmission gears

Details of the structure of network of a back cover of transmission gears


2 — Kardannyj a wave 5, 21, 200a — bolts 6, 20, 36 — glass 7, 35, 88, 200 — mother	18 — a motor support 19 — the motor carrier 56 — network 87 — a flange

Removal

Details of the device of the carrier of the Aufhängung support of the power plant


18 — the Aufhängung support of the power plant 19 — the carrier 21 — bolts of underground mining 35 — mother of underground mining

EXECUTION ORDER

1. Lift transmission gears by means of the elevator. 2. Prevent mother of strengthening of a support of the motor (35). Prevent bolts (21) with glasses and accept the carrier (19) together with the Aufhängung support of the motor (18).
3. Prevent kardannyj a wave from transmission gears. Prevent a bolt (8) strengthenings of a wave of a speedometer (9) and accept it.
4. Weaken Einstelbüchse in a wave kardannogo flange. You use for this wykolotka from diameter of 10 mm and length about 150 mm.
5. Weaken mother of kardannogo of a wave and translate kardannyj a flange wave in the direction of later constructing machines.
6. Prevent bolts of basic installation (200a).
7. Prevent mother of strengthening of a flange of transmission gears.
8. Accept a flange of transmission gears.
9. poddew from the screw-driver, you pull out network from a cover of transmission gears by means of the screw-driver.

Device

The device will be as it should be, carried out down removals.