Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ Electric equipment of the motor
- Gear shifting boxes
   Specifications
   Removal and device of transmission gears
   Forward cover of transmission gears - a device detail
   Removal and device of a back cover of transmission gears
   + RKPP 717.438
   - RKPP 717.454
      Removal and device of a sensor of speed of the car (VSS)
      Removal and device of a forward cover of transmission gears
      Removal and device of a back cover of transmission gears
      Removal and the device between kartera
      Compensation of network of a back cover of transmission gears
      Removal and device of waves of transmission gears
      Discussion and installation of an intermediate wave
      Check of rasmernych of characteristics of transmission gears
      Compensation of conic roller bearings of an intermediate wave
      Compensation of ball-bearings of an intermediate wave
      Regulation of the mechanism of gear shifting
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment


Removal and device of a back cover of transmission gears

Details of the device of a back cover of RKPP

Details of the device of a back cover of transmission gears

50, 113b, 103a — transferring
71 — the lever of application of the 1st transfer
72, 82a, 113a — bolts
82 — the Back cover of transmission gears

87 — a flange
88 — mother
100 — transmission gears
113 — the one-piece bearing

Removal

 EXECUTION ORDER

1. Strengthen transmission gears on the shelf.
2. Accept the one-piece bearing (113).
3. Prevent mother (88) and accept a flange (87).
4. Accept the appendix lever at (71) 1st transfers.
5. Prevent a bolt (101) and accept a wave (103).
6. Prevent bolts (82a) and accept a cover of transmission gears (82).

Device

 EXECUTION ORDER

1. Replace transferring (50), grease bolts (82a) with germetikom 001 369 2520 (Hylomar) and tighten bolts of the moment of 23 Nanometers.

2. Replace uplotnitelnoje a ring (103a), grease a bolt (101) of germetikom 001 989 25 20 (Hylomar) and tighten 5 Nanometers from its moment.

3. Replace mother (88) and tighten 160 Nanometers from her moment.

4. The device as it should be, carried out down removals will be farther.