Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car

Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ Brake system
- Aufhängung and management
   Precautionary measures
   Corners of the device of wheels of the car, klirens
   - Suspension bracket of a forward axis
      Regulation of freedom of action in the camp of a forward wheel
      Removal and device of the lower spherical support
      Check of a condition of the top spherical support
      Compensation of the top cross lever
      Compensation of the lower cross lever
      Removal, check and device of the plug of a forward wheel
      Removal and structure of installation transitional Faust
      Removal and device of a feather of screws
      Removal and device of the stabilizer of cross immunity
      Removal and device of the muffler
      The klirensa regulator of a suspension bracket of a forward axis - a device detail
   + Back Aufhängung
   + management
+ body
+ electric onboard equipment

Compensation of the lower cross lever

Removal

EXECUTION ORDER

1. Divide the lever with installation transitional Faust (with watch removal and the device of the lower spherical support left).
2. Pull out strengthening (47á) and separate the muffler (47) from the lever.
3. Return Muttern ekszentrikowych of bolts (19, 19b, 20 and 20b) and accept installation of the lower lever, - you try to remember the adjusting joint-stock companies of bolts.
4. As a last resort do a spherical support of the lever (freely watch removal and the device of the lower spherical support left).

Device

EXECUTION ORDER

1. The device is made upside-down. Replace with all samokontrjaschtschijsja strengthening.
2. Do not forget to make regulation of corners of the device of forward wheels of the car.

The delay of Muttern ekszentrikowych of bolts has to be made after immersion of the car on the earth.