Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
- Operation manual
Specifications
+ access, protection
+ elements of systems of reliability
+ car equipment, arrangement of devices and administrative bodies
- Comfort
Independent heater
+ pictures of the enterprise and auxiliary systems
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ connection
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment
|
Independent heater
|
|
It is not allowed to activate the independent heater in territories of a gas station and within the enclosed space, not equipped with compulsory ventilation. |
The programmed independent petrol heater of salon belongs to a basic equipment of all models except the automated air conditioning system. The control panel of functioning of the heater with the installed display of data will be in the right top corner of vertical section of the central console interrupted.
Control panel of functioning of the independent heater of salon
|
|
|
1 — a control light-emitting diode of the mode of preliminary devices it (is yellow)
2 — a control light-emitting diode of activization of the heater (green)
3 — the display of data
|
|
The button allows to program up to 3 applications of the heater.
By means of the button the entrance is made in the mode of the device of the current time, day of the week and time of application of the heater.
Correction of data in the mode of the device is made by buttons and (forward / back).
For urgent activization of the heater the button serves.
Before application of the heater it is necessary by means of buttons or on the control panel of the Konditionierung system to expose value of temperature to which air has to be heated in salon.
For urgent activization of the heater you press control panels the button, - the control light-emitting diode of green color installed in the panel has to ignite. Activization of the heater happens approximately after 30 seconds or at temperature drop of the cooled liquid up to value it is below 70 °C. The maximum term of functioning of establishment forms 60 minutes. Shutdown of the heater can be made by the repeated pressure of the button, - the light-emitting diode has to lose force.
Device of the current time The entrance to the mode of the device of the current time is made by carrying out the pressed button, - on the screen begin to blink time. Correction of statements is made by means of buttons and.
|
|
Simultaneous pressure of buttons allows to change time with a step 1 minute. |
Approximately the name of day of the week is displayed 3 seconds in probleskowom to the modes, - the device is made by means of the same buttons ().
|
|
For the device of day of the week it is necessary to change meanwhile time even if for a minute. |
Device of the moment of application of the heater The design of establishment allows to program to 3 applications of the heater a possibility of the choice then each 3 devices.
For an entrance to the device mode you press the button R heater one control panels, 2 or several times (there will be the first, second and third appendix as appropriate), - on the control panel a control light-emitting diode of yellow color ignite, and the last entered statement, for example, will be displayed:
|
|
Number 1 in the left top corner of the display designates number of the programmed appendix (an appeal after the unique pressure of the button). |
Correction of statements is made by means of buttons and.
First, correction of value of time of the appendix is made, - the simultaneous pressure of buttons allows to change statements with a step 1 minute. Then, - day of the week. Hardly the name of day of the week will begin to blink, press one of Einstelschaltflächen (or) and adhere from this it is clamped within about 3 seconds. As a last resort day of the week cannot brag, - you choose the name in the form of 2 hyphens (-).
20 seconds will lose force after the termination of the device the announcement of time and day on the display. The turn of the programme of the last device remains lit in the left top corner of the screen. Will continue to burn also yellow control light-emitting diode of the presselekzii mode.
For an exit from the presselekzii mode (refusal on the programmed application of the heater) you press the button R until from the screen number of program introduction does not vanish a yellow control light-emitting diode do not lose force.
Activization of everyone it is entered into memory of establishment of devices on the set application of the heater it is made also by means of the button R, - in the left top corner of the screen it will have to be lit a turn of the programme, and also (on 20 seconds) - the entered data.
If day of the week was not set, the left bottom corner of the screen remains empty, for example:
At such device activization of the heater will be made daily around 20:45.
The exception of the heater is made If on the control panel the green control light-emitting diode burns, is necessary on the button if it is yellow, - the button R (to press you press will not lose force until from the screen the turn of the programme and the diode is not gone).
The mode of check of the chosen devices Press and hold it is clamped the button, - the statement of the current time of days and day of the week will be displayed, for example:
Dismiss the button, - the statement of the activated presselekzii mode, for example, will be displayed about 3 seconds:
In this case activization of the heater will be according to the device of the first programmed appendix every Saturday, at 5:30 in the morning are made.
At last, from the screen there will be all data, except number of the activated software application of the heater vanish:
Remote control of the independent heater YOU panel of the independent heater
|
|
|
1 — the button of activization of radio station
2 — a control light-emitting diode
3 — the antenna |
|
The distant control panel (TY) belongs to the offer of the heater.
The panel allows to activate the independent heater of removal to 1000 m.
|
|
At signal transmission from the enclosed space width of action of radio station can decrease.
|
They upward consider YOU panel from the antenna. Press radio stations the button, - the control light-emitting diode has to ignite. Dismiss the button, - the diode will lose force approximately after 6 seconds, to continue the panel during which is necessary to adhere upward from the antenna.
Activization of the independent heater will be about 30 seconds, or occur if it temperature of the cooled liquid of 70 °C is lower. The maximum term of continuous functioning of the heater forms 60 minutes.
Functioning of the heater can be stopped from a car interior by means of pressure upon the button, - the green control light-emitting diode on the control panel has to lose force.
|
|
If at naschimanii on the button of radio station of an iznosa of a control light-emitting diode do not occur, the battery of the panel is necessary will replace.
|
Compensation of a battery of YOU panel Compensation of a battery of YOU panel of the independent heater
|
|
|
1 — Sdwischnaja of covers
2 — polarity of the device of an element
|
|
Set a cover of access of the lower party of YOU panel, pull out a battery and establish on its place in a new way, - you pursue for attention of polarity.
Establish into place a cover.
|
|
Application of the used battery has to be made observing requirements of norms after environment protection!
|
General comments by rules of use of the independent heater For the purpose of economy of freight of the battery you avoid unreasonable applications of the heater which especially follow in turn short time. Connect the heater about hardly salon it will be enough heated.
It is necessary to have it is necessary because of that at application of the heater at is pulled out from the lock or 1 in situation 1 or 0 the ignition key activization of the K/W fan only occurs after the cooled liquid is heated to a certain temperature.
By transfer of food after shutdown of onboard food statements of day of the week and time of days are output to the screen in probleskowom to the modes, it is necessary to correct it first of all. Further the device of the programmed applications of the heater can be registered in memory of establishment.
Spontaneous shutdown of a green control light-emitting diode demonstrates defect existence, - in parallel on the screen the letter of F is lit, - you ask for the help on Mercedes Benz service station.
|
|