Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ awtomatitscheckaja transmission
- Connection
   + connection
   kardannyj wave
   + power shafts
   - Differential
      Discussion, installation and check of differential
      Discussion and installation of Reduziergetriebes of the main transfer and regulation of freedom of action of gear wheels
      Determination of thickness of the regulating transferring and its device in Reduziergetriebes body
      Check and regulation of freedom of action of a flange
      Discussion and installation of Reduziergetriebes of the main transfer and regulation of freedom of action of gear wheels (model 140.28 / 032 / O33 till 31.05.94 wyp., 140.042/043/063/1 and to diameter of differential of 210 mm)
      Discussion and installation of differential with automatic blocking
      Compensation of the cylinder of differential with automatic blocking (model 140.028/032/033 till 31.05.94 wyp. And 140.1 with a code 211a)
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment


Compensation of the cylinder of differential with automatic blocking (model 140.028/032/033 till 31.05.94 wyp. And 140.1 with a code 211a)

Diameter of differential is 210 mm.


Compensation of the cylinder of differential with automatic blocking (diameters of differential of 210 mm)

30 — a blocking ring
33b — a flange
33c — the ball-bearing
50 — Reduziergetriebe
54 — the Back cover

56, 56b — bolts
70b — pistons
70d — a rubber cap
70 h, 70 joules — Uplotnitelnyje of a ring


 EXECUTION ORDER

1. Accept Reduziergetriebe (50).
2. Pull together oil from Reduziergetriebe.
3. Accept a back cover (54).
4. Exclude a blocking ring (30).
5. Accept a flange (33b).
6. Accept the ball-bearing (33c).
7. By means of the wypressujte screw-driver a rubber cap (70d) from a camp cover.
8. Install a tiskalshchik (07l) in the piston (70b) and be lowered by uplotnitelnoje a ring (70 joules), accept a rubber cap (70d) from the piston (70b), accept the piston (70b) from a side cover of the camp, weaken the listener of sapuna (arrows).
9. Be lowered by ring uplotnitelnyje (70 h) and (70i) you do not determine them twice. Grease carefully the piston (70b) with hydraulic liquid (specification 343.0) and sapressujte. Grease the association sapuna after piston sapressowki. At piston sapressowke in a side cover of the camp, are convinced that a fold a finger of roles (70c) or to opening (shooter) united.
10. Replace uplotnitelnoje a ring (70j), - for this purpose, grease uplotnitelnuju the edging universally of gipoidnoj transmissionnoj with liquid and their sapressujte by means of wykolotki (073).
11. The press of small diameter (072b), a rubber cap (70d) on the piston using sapressujte.
12. By means of the press of bolschego of diameter (072a), sapressujte a rubber cap (70d) on a side cover of the camp.
13. Further all procedures are carried out upside-down.
14. Prokatschajte hydraulic system of a differential obstacle.