Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ awtomatitscheckaja transmission
- Connection
+ connection
kardannyj wave
+ power shafts
- Differential
Discussion, installation and check of differential
Discussion and installation of Reduziergetriebes of the main transfer and regulation of freedom of action of gear wheels
Determination of thickness of the regulating transferring and its device in Reduziergetriebes body
Check and regulation of freedom of action of a flange
Discussion and installation of Reduziergetriebes of the main transfer and regulation of freedom of action of gear wheels (model 140.28 / 032 / O33 till 31.05.94 wyp., 140.042/043/063/1 and to diameter of differential of 210 mm)
Discussion and installation of differential with automatic blocking
Compensation of the cylinder of differential with automatic blocking (model 140.028/032/033 till 31.05.94 wyp. And 140.1 with a code 211a)
+ brake system
+ Aufhängung and management
+ body
+ electric onboard equipment
|
Discussion and installation of differential with automatic blocking
Differential with automatic blocking Differential with automatic blocking
|
|
|
A — the Reibscheiben block with the conducted gear wheel of diameter of 185 mm
In — the Reibscheiben block with the conducted gear wheel of diameter of 210 mm |
|
Discussion By means of wykolotki you pull out a finger of roles (19) and a finger of differential (16) to a body of differential (13)
|
|
|
14 — Spherical glass
15 — satellites
17 — a gear wheel of an incentive of power shafts |
22 — Reibscheibe with a slip, on the one hand
23, 23a — Reibscheiben without slips
24 — Reibscheiben with overlays of both parties |
|
|
| 1. Strengthen a body of differential (13). |
|
| 2. Pull out a finger of roles (19) and a finger of differential (16) by means of wykolotki from a body of differential (13). |
| 3. Establish wykolotki (046) in gear wheels of an incentive of power shafts (17). |
|
| 4. Prowernite satellites (15) with spherical glasses (14) in the direction after opening you just accept them. |
|
| 5. First, take the gear wheel of an incentive of a power shaft (17) would argue (far in a certain situation it is shown) with Reibscheiben. |
|
| 6. Accept the left gear wheel of an incentive of a power shaft (17) (from the conducted gear wheel) with Reibscheiben. |
|
|
Installation Strengthen Reibscheiben in the correct order on both gear wheels of an incentive of power shafts (17)
|
|
|
17 — a gear wheel of an incentive of a power shaft
22 — Reibscheibe with a slip, on the one hand
23, 23a — Reibscheiben without slips
24 — Reibscheiben with overlays of both parties |
|
|
|
| 1. Strengthen Reibscheiben in the correct order on both gear wheels of an incentive of power shafts (17) and carefully you grease Reibscheiben (22 and (24) universally gipoidnoj transmissionnoj with liquid. |
| 2. First, establish the left gear wheel of an incentive of a power shaft (from the conducted gear wheel) with Reibscheiben, then you establish the gear wheel of an incentive of a power shaft (17) would argue with Reibscheiben and you establish wykolotku (046) which pays attention that Reibscheiben have without overlays of uschki. |
|
| 3. Install satellites (15) with spherical glasses (14), using wykolotku (046), screw up them until they are not established in a differential body. |
|
4. Install a differential finger by means of wykolotki in satellites and spherical glasses.
5. Check the moment of friction of differential. It has to form 80-160 Nanometers.
|
| 6. Establish a finger of differential (16) and a finger of roles (19). |
|
| 7. Pull out differential from Schraubstock.
|
|
|
|