Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ Connection
- Brake system
Specifications
Arrangement of the antiprobuksowotschnoj components of the ASR/ETS system
Arrangement of components of the Extrabremsens (BAS) amplifier
Arrangement of components of the ESP system
Discussion and installation of the main brake cylinder (GTZ) as "tandem" (model 140.028/032/033/135)
Removal, device and check of serviceability of functioning of Servoantriebes of the amplifier of vacuum of brakes
Removal and device of brake support
Check of thickness of Bremsdisk and overlays of Bremsleistens
Removal and Leistens stojanotschnogo device of a brake
Removal and device of a forward rope of an incentive stojanotschnogo of a brake
Regulation of stojanotschnogo of a brake
Wheel sensors the antiblocking device - a device detail
+ Aufhängung and management
+ body
+ electric onboard equipment
|
Discussion and installation of the main brake cylinder (GTZ) as "tandem" (model 140.028/032/033/135)
GTZ design as "tandem" GTZ design as "tandem"
|
|
|
3, 7, 20 — pistons
5 — a blocking ring
8 — a blocking disk
9 — a stopper |
10 — a container
22 — a body
27 — the Directing finger |
Discussion
|
|
| 1. Press a finger (3) a little and pull out a cylindrical finger (27) by means of flat-nose pliers. |
|
| 2. Accept a blocking ring (5) and accept the piston (3) together with repeated network from a body (22). |
|
| 3. Pull out the floating piston by means of flat-nose pliers from a body (22). |
|
4. Wipe a body and check the internal surfaces of a body for absence of damage.
5. Wipe all details of new brake fluid. |
|
Installation
|
|
1. Exclude the plug (040) from the plug (041).
2. Pull out repeated network and the piston from the plug (041). |
|
| 3. Strengthen a body from (22) opening down. |
|
4. Grease opening of a body with brake fluid.
5. Install the plug (040) in opening and sapressujte the floating piston (20) before blow by means of the screw-driver. At the piston device, are convinced that the judging fold (shooter) is defined vertically.
6. Establish a cylindrical finger and pull out the plug (040).
7. Strengthen the brake cylinder of opening upward.
8. Establish repeated network in a body (22) and sapressujte. |
|
| 9. Strengthen the piston (7), establish a blocking disk (8) and strengthen from its blocking ring (5), pursue correctness of disembarkation in a fold of a body (22) Blocking rings (5). |
|
| 10. Grease traffic jams about (9) brake fluid and their sapressujte in a body (22). Install a container (10) with the listener on a body (22), turn on 180 ° and then you establish the second listener to a body (22). |
|
|
|
|