Mercedes S-Class W-140

In 1991-1999 editions

Repair and enterprise of the car


Mercedes S-Class
+ Mercedes Benz cars of the class S (W-140)
+ operation manual
+ Routine maintenance
+ motor
+ cooling systems, heating
+ systems of power supply and edition
+ electric equipment of the motor
+ gear shifting boxes
+ Awtomatitscheckaja transmission
+ Connection
- Brake system
   Specifications
   Arrangement of the antiprobuksowotschnoj components of the ASR/ETS system
   Arrangement of components of the Extrabremsens (BAS) amplifier
   Arrangement of components of the ESP system
   Discussion and installation of the main brake cylinder (GTZ) as "tandem" (model 140.028/032/033/135)
   Removal, device and check of serviceability of functioning of Servoantriebes of the amplifier of vacuum of brakes
   Removal and device of brake support
   Check of thickness of Bremsdisk and overlays of Bremsleistens
   Removal and Leistens stojanotschnogo device of a brake
   Removal and device of a forward rope of an incentive stojanotschnogo of a brake
   Regulation of stojanotschnogo of a brake
   Wheel sensors the antiblocking device - a device detail
+ Aufhängung and management
+ body
+ electric onboard equipment


Regulation of stojanotschnogo of a brake

Models till 01.11.93

Regulation of stojanotschnogo of a brake on models 140 till 31.10.93 wyp.


 EXECUTION ORDER

1. Lift constructing machines.
2. Prevent after a bolt on each back wheel.
3. By means of the screw-driver (3 mm), you turn the regulating bolt of "b" of the regulator (105) clockwise until the back wheel is not blocked.
4. Prowernite of the regulating bolts (b) back, for example, on 5 - 5.5 changes in such a way that the wheel could rotate freely.
5. Repeatedly to a vyrazta brake stojanotschnogo incentive pedal.
6. Turn bolts of strengthening of wheels and lower the car.

Models of 01.11.93 wyp.

Regulation of stojanotschnogo of a brake on models 140 till 01.11.93 wyp.


 EXECUTION ORDER

1. Lift constructing machines.
2. Prevent after a bolt on each back wheel.
3. By means of the screw-driver (4.5 mm), you turn regulation of kolessiko (105) in such a way that brake levels the wheel blocked.
4. Prowernite back regulation of kolessiko (105) in such a way that the wheel (for example, on 5-6 subjew) could rotate freely.