|
1. Establish covers of thorough camps. If the cover is correctly defined, it has to be postponed by uschko on the left if to look at the direction of the movement (i.e. to be from the access pipeline).
|
|
| 2. Measure diameter of opening under a bent shaft in the block of cylinders (with is certain kryschkami of thorough camps) in the A, V and S directions |
|
3. Measure diameter of opening in the direction A and write down it. Even if, for example, 62.51 mm.
4. Accept a cover of the thorough camp. |
| 5. Measure diameter of schejki of the thorough camp. Even if, for example, 57.95 mm. |
|
6. Make calculation of freedom of action: diameter of opening (62.51 mm) - diameters of schejki of the thorough camp of a bent shaft (57.35 mm) = 4.55 mm this result pull you the face value of size of radial freedom of action of 0.04 mm (with address specifications of the table) and you receive 4.51 mm this result you divide on 2 and you receive thickness of the appendix of 2.255 mm.
7. Choose application of the corresponding thickness. For example: You choose thickness of the appendix of 2.255 mm According to requirements of specifications the appendix after color. In this case, this application of blue color.
8. Install applications of an instinct pole in a cover of a pole of an instinct and strengthen from its bolts. |
| 9. Measure diameter of the lower head of a pole of an instinct with appendices. |
|
| 10. Measure diameter of schatunnych schejek and after the measured value you define radial freedom of action in camps of a bent shaft. Diameter of the lower head of a pole of an instinct (with appendices) - diameters of schatunnoj schejki = Radial freedom of action of a bent shaft. |
|